The pump is primarily intended for floor leveling, but is also suitable for other types of pumpable drymixt material. The mixer pump is Swedish-made, and is a robust machine built for Nordic conditions, of components tested for over 30 years on construction machinery.

Thanks to its low weight and its cleverly positioned handles, the pump is very easy to move, and load in and out, for example. a truck on loose ramps.

The mixer pump has been developed in a user-friendly manner, making it very easy to boot and, above all, easy to clean. Quick coupling and multiple jacket variants make it easy to switch between different pumpable materials. Dust hood and micro switch are a matter of course for the best possible working environment.

Power supply:
Three-phase 400V – 50Hz Three-phase 230V – 50Hz Three-phase 230V – 60Hz
Gear motor: 5,5 kW
Conveying distance: 40 – 60m
Material hose: 35mm
Maximum grain size: 6mm Pump height: 6 floors
Weight: 165kg

CAPACITY
Floor equalization: 3,5 - 4,5 tons / h
Type EPS Cement: 2 - 5 kbm / h Pumped dry concrete: 1,5 - 3,5 ton / h

• Video instructions in swedish

• Download manual

Nordic 2.2 has a low weight and can be divided into two parts, if you pick up the engine and the mantle package, the pump only weighs 47 kg, which makes the pump very easy to move and load in and out of a transport vehicle both with and without ramps.

Mixer Pump Nordic 2.2 has been developed in a user-friendly manner, making it very easy to boot and, above all, easy to clean. Quick coupling and multiple jacket variants make it easy to switch between different pumpable materials.

Safety switches for moving parts and a dust hood are a matter of course for a good and safe work environment.

The mixer pump is made in Sweden. It is a robust machine built for Nordic conditions of components tested for over 30 years on construction machinery.

Power supply: Single phase 230 Volt
Gear motor: 2,2 kW
Recommended fuse: Min. 13 Amp
Material hose: 30 m
Hose diameter: 25 mm
Maximum grain size: 4 mm
Pump height: 4-5 floors

Capacity: about 2 tons / hour, extra long mixing tube provides homogeneous and good mixed products.

• Video instructions in swedish

• Download manual

Nordic 1.5 has a low weight and can be divided into three parts, if you pick up the engine and the mantle package, the pump only weighs 47 kg, which makes the pump very easy to move and load in and out of a transport vehicle both with and without ramps.

Mixer Pump Nordic 1.5 has been developed in a user-friendly manner, making it very easy to boot and, above all, easy to clean.

Quick coupling and multiple jacket variants make it easy to switch between different pumpable materials.

Safety switches for moving parts and a dust hood are a matter of course for a good and safe work environment.

The mixer pump is made in Sweden. It is a robust machine built for Nordic conditions of components tested for over 30 years on construction machinery.

Power supply: Single phase 230 V - 50 Hz
Gear motor: 1,5 kW
Conveying distance: 30-40 m Material hose: 25 mm
Maximum grain size: 4 mm Pump height: 4 floors
Weight: ca 90 kg

Capacity: about 1.5 tons / hour, extra long mixing tube provides homogeneous and good mixed products

• Video instructions in swedish

• Download manual

The NP230 is an easy-to-use conveying pump that weighs only 60 kg. NP230 pumps the material through a light and smooth 1 "hose up to 4 floors. NP230 can pump in hose lengths up to 40m.

NP230 takes a very small amount of space, if necessary, the conveying pump can be adjusted to the highest level to take as little space as possible on the warehouse or in the car.

Thanks to its low weight, the NP230 is easy to load and unload in trucks. NP230 is incredibly easy to "get started", make sure it is spinning around, then pour the pre-mixed material into the pump, and turn the button on the included remote control.

NP230 is as easy to clean as starting up, flush with clean water and clean the hose with water and balls. NP230 is manufactured in Sweden and is a robust machine for tough handling in the construction industry.

Power supply: Single phase 230 V - 50 Hz
Gear motor: 1,5 kW
Conveying distance: 20 – 40m
Material hose: 25mm
Maximum grain size: 4mm
Pump height: 4 floors
Weight: 60kg

CAPACITY
Screed: 1400 kg / h
Expander Concrete: 1200 kg / h

• Video instructions in swedish

• Download manual

NP231V has variable engine speed and start-stop can be controlled with a wireless controller. Ideal for a wide range of powder products, lime-, plaster- and cement-based surface coatings.

Thanks to its low weight, the NP231V conveying pump is easy to move and load in and out of transport vehicles.

NP231V conveying pump is very easy to boot and clean, flush with clean water and clean the hose with water and balls.

NP231V is manufactured in Sweden and is a robust machine for hard handling in the construction industry.

Power supply: Three phase 400 V – 50 Hz
Gear motor: 2,2 kW
Conveying distance: 20 – 40m
Conveying output: 2,5 - 12 liter / min
Material hose: 25 mm
Maximum grain size: 4 mm Pump height: 5 floors
Hopper: 80 liters
Filling height: 44 cm
Dimensions: L/W/H 120x63x65 cm
Weight: 85kg

• Video instructions in swedish

• Download manual

NP 255 Pro has variable speed range as can be controlled on operating pump and start-stop can be controlled with a wireless controller.

With the transport wheels recessed and the pump in working mode, the fill height is only 44 cm, but it is possible to increase the hopper volume quickly and easily with frames that increase the volume by 40 liters per frame.

Perfect for cement, lime, dry concrete, fire seal, jointing and all types of pumpable products.

Thanks to its low weight and transport wheels, the NP 255 Pro is easy to handle and load in and out of transport vehicles.

NP 255 Pro is very easy to boot and clean, open the bottom door, flush with clean water and clean the hose with water and balls.

NP 255 Pro conveying pump is manufactured in Sweden and is a robust machine for tough handling in the construction and mining industry.

Power supply: Three phase 400 V – 50 Hz
Gear motor: 5,5 kW
Conveying distance: 80m Conveying output: 10 - 50 litres/min
Material hose: 35 mm
Maximum grain size: 6 mm Pump height: 8 floors
Hopper: 80 - 200 liters
Filling height: 44 – 74 cm
Dimensions: L/W/H 124x63x65 cm
Weight: 145 kg

• Video instructions in swedish

• Download manual

The machine has legs with three height positions for adjustment to the desired outlet height.

Nordic 101 is a 230V 1 phase machine.

Motor 1-phase: 230 V / 1,5 Kw
Hopper: 100 Liter
Minimum loading height: 93 cm Maximum loading height: 117 cm Minimum height outlet: 46 cm Maximum height outlet: 71 cm Dimensions: 150x73
Dimensions with folded motor: 118x105
Weight: 101 kg

• Video instructions in swedish

• Download manual

The machine can also be raised and lowered in three positions for adaptation to the desired outlet height. It can be supplied with a dust cover with a vacuum cleaner outlet for a more pleasant working environment.

Capacity: approx. 3 tons/hour

Loading height:

Mode 1 - 88 cm

Mode 2 - 100.5 cm

Mode 3 - 113 cm

Discharge height:

Mode 1 - 45 cm

Mode 2 - 57.5 cm

Mode 3 - 70 cm

Length without mixer pipe: 130 cm

Width: 75 cm

Weight: 138 kg

• Video instructions in swedish (not available)

• Download manual